Why cold-pressed terminals there will be poor insulation phe

If we do not know much about the cold-pressed terminals or the cold-pressed terminals, and the insulation properties of the terminals are getting worse and worse during use, then how can we effectively deal with such problems? Solve it?

Cold crimping terminals or terminals, if any contact with the poor phenomenon, then basically because of the external cable there is a greater pressure, because the touch in the construction is still relatively good, and the function is also stable However, when there is an irrational structure and the mold is unstable.

Then lead to cold-formed terminal insulation performance deterioration is inevitable, the terminal will also appear because of the same factors and poor insulation properties, which will directly lead to or affect the normal use, and cause serious damage to the device, And poor contact and other fault content.

Insulation poor performance of cold-pressed terminals, is absolutely not directly used, must be checked and overhaul before re-put into use, because the touch between the shell and are insulated, the two appear unreasonable structure , Then the use of the process will certainly be bad.

Because the insulator has many metal objects on the surface or in the interior, the use of cold-pressed terminals or terminal fittings can become very dangerous if harmful gases are diluted or adsorbed directly on the surface. More serious Is to promote the components appear damaged, and poor contact and so on.

If the cold compression terminals in the insulation on the existence of poor, then it certainly will not achieve any insulation effect, and before the solid insulation made by the protection, the basic effect will be lost, then there is the positioning and locking Related to the use, if there is still a lack of words, it will certainly affect the normal use of the terminal.