- Ring Terminal
- Spade Terminal
- Pin Terminal
- blade Terminal
- Locking spade terminals
- Flange spade terminals
- Hook terminals
- Lipped blade terminals
- Tubularlugs terminals TL type
- Plug-in needle
- Female/Male Pre-Insulated Quic
- Quick splice connectors
- Closed end connector
- Butt splice connectors
- Cord end terminals
- Power connector
- Wiring accessories
- Building wiring connector
- UK series general terminal
- Plastic waterproof cable joint
- Air outlet series
- Width male terminal
- Width female terminal
- Plug terminal
- Socket terminal
- Lamp socket terminal&Fuse term
2017-05-05Pressure wire cap details
Pressure cap detailed description: Crimping cap: Consumables used to crimp the wire connection node in the circuit. 1. Material: made of UL approved nylon 66 material, fire rating 94V-2 and 94V-0. 2. Usage: peel off the wire tail and then i...
2017-05-05Introduction of Flame Retardant Mechanism of Insulation Term
In general, flame retardant mechanism is to add a certain proportion of plastic in the flame retardant, the oxygen index increased, resulting in flame retardant effect. Of course, the oxygen index is only indicative of the flammability of t...
2017-05-05European standard terminal introduction
The current rating of components in Europe is determined by monitoring the temperature of the metal conductor as the current increases. When the temperature of the metal pin is 45 ℃ higher than the ambient temperature, the tester uses the...
2017-05-05Terminal insulation performance degradation solution
First, the decline in insulation The role of the insulator is to keep the contacts in the correct position and to insulate the contacts from the contacts and between the contacts and the housing. Therefore, the insulation must have excellen...
2017-05-05Terminals poor contact solution introduced
First, poor contact The metal conductor inside the terminal is the core part of the terminal that transmits the voltage, current or signal from an external wire or cable to the corresponding contact on the mating connector. Therefore, the c...
2017-05-05Introduction of high current terminal installation method
High-current terminals in the installation of the correct construction methods 10 kV line zero sequence protection device with a large external terminal with zero current high current terminals, the design and construction should pay attent...
2017-05-05Introduction to the role of terminals
Imagine if there is no terminal will be like this time between the circuit to use a continuous conductor permanently connected together, for example, to connect the electronic device on the power supply, you must connect the ends of the wir...
2017-05-05Terminal installation torque introduction
Terminal block since its inception, in the inverter, controller and other industries have been widely used in the field of connection. In view of the diversity of terminal types and the wide range of application fields, there is no specific...